s&w model 39-2

S&w Model 39-2 - The Smith & Wesson Model 39 is a semi-automatic pistol developed for the 1954 United States Army Service Pistol Trials.

After the military abandoned its pursuit of a new pistol, the Model 39 WT hit the civilian market in 1955 and was the first of Smith & Wesson's first generation of semi-automatic pistols.

S&w Model 39-2

During World War II, the German Walther P38 double-action/single-action pistol so influenced American ordnance that the Army Ordnance Corps issued a proposed American equivalent of the P38. In 1949, Smith & Wesson began producing the Model 39 in 9×19mm Luger, and in 1955 it hit the market. This is the first U.S. The design was a double-action (DA) semi-automatic pistol and was designed to replace the serviceable M1911A1. . The 1911 was still very popular for law, military, and civilian use, but it featured only a single-action trigger and a heavy steel frame.

Sprzedam: Smith & Wesson Model 39 2, Kal. 9×19 Mm Dostawa W Cenie! • Ogłoszenia • Netgun.pl

A modified version of the Model 39 with a wider grip frame to accommodate a 14-round magazine was used by Naval Special Warfare units during the Vietnam War.

This MST-2 was issued to Officers in Charge (OICs) of troops as their sidearms. SEAL teams used either the unmodified Model 39 or a modified version, the Mk 22 Mod 0, known as the "Hush Chuck".

The improved pistol had a suppressor with a slide lock (prevents the slide from recoiling when fired, thus reducing the noise produced). The Mk22 Mod 0 had enlarged iron sights to allow easier sighting of the massive suppressor. The purpose of the gun was to kill stray dogs or guards without fearing the real target.

The Mk 22 was the basis for the later Smith & Wesson Model 59, which retained the original 9mm Parabellum caliber, but added a wider aluminum frame with a straight backstrap to accommodate a double-column magazine that held 14 rounds. could

Pistol Smith & Wesson 39 2

A breakthrough in introducing semi-automatic pistols to law enforcement agencies. This publicity helped commercial sales and set the stage for the more acceptable Model 59 with its high-capacity magazine, at least in undercover or undercover police use where the double-action feature (and large magazine capacity) was too much. People understood better than that. Single-stack semi-automatics and revolvers of the time.

The Model 39 was designed with an anodized aluminum frame, a curved backstrap, and a blued carbon steel slide with a manual safety. The grip consisted of three pieces of two pieces of walnut wood attached by screws to an aluminum frame handle. Later versions of the Model 39 would include black polymer grips. The Model 39's magazine release is located at the rear of the trigger guard, unlike most European designs that still use a heel release. The Model 39 used a traditional slide, barrel bushing, slide arrangement as opposed to the open barrel and collapsible locking block of the P38. Locking the slide to the barrel on the Model 39 locking is achieved by modifying the Browning P35 (High Power) cam lock breech.

First-generation Model 39 slides used either a long, spring steel extractor or a spring-loaded, pivoting claw extractor. The long extractor was found to be fragile and was replaced by a pivoting type. However, the longer extractor proved to be more reliable than the axle version.

The Model 39 has features common to the Walther P38 such as a combination safety and a decocker that disconnects the trigger and hammer. Smith & Wesson Ave also copied the 8 round single stack magazine but added a magazine catch cutout to accommodate the button release closer to the trigger guard more popular on American pistols. The overall lgth of the Model 39 was 7.6 inches, the barrel is 4 inches longer. The Model 39 weighed 1.72 pounds. This light weight is due to its aluminum frame.

Two Smith & Wesson Model 39 Semi Automatic Pistols

During early testing, a few Model 39s with steel frames were produced. The steel-framed test model provided the basis for the Model 52 target pistol. The Model 52 had a longer (5-inch) barrel and slide and was one of the few semi-automatic pistols chambered for the .38 Special cartridge (only with flush-seated, full-wadcutter bullets). Magazine capacity was limited to five rounds due to the size of the rimmed cartridge. Another variant, the Model 952, in 9mm Luger, is still produced in limited quantities by Smith & Wesson's Performance Cutter. The Model 52 was discontinued in 1992 when the pistol manufacturing machinery broke and was too expensive to replace.

The original Model 39 is now known as the "first generation" design as a number of similar designs continued to be produced in three generations of metal frame semi-automatic pistols produced until 2004. Numerical model number, second generation uses 3 digits and third generation models use 4 digits.

The second generation of the Model 39 was known as the Version 439 and was released in 1980. 639 was also released, a stainless steel 439. In 1989, the 439 was replaced by a third-generation model, the 3904, which had its own stainless version, the 3906. Both the 3904 and 3906 were discontinued in 1991, and more attention was focused on higher-capacity double-stack models. 5906. This became the D of the Smith & Wesson Model 39 family, and the third generation of tires would later be discontinued in 1999 in favor of the cheaper Sigma line.

Smith & Wesson introduced various compact versions of the third-generation Model 39 beginning in the 1990s, including the Models 3913, 3914, 3953, 3954, and 908 with shorter frames and slides. on the ASP pistol and Charles Kelsey on the Devil pistol, which was a custom short conversion of the Model 39. I still get quite a few requests from my readers for more review articles on all-metal handguns, and even more so, it's getting harder and harder to do. Polymer frame handguns have been the trend for the past 20+ years. I must admit, my small collection consists of less and less all-metal handguns and more and more polymer frame handguns. When the first Glock came out, it was called the Glock 17, and even though the magazine capacity was 17 rounds, it wasn't called a 17, because it was a 17.

Scarce Steel Frame Smith & Wesson Model 39 Pistol With Box

Patent issued to Gaston Glock. Even today, Glock model numbers can be pretty confusing - guess you need a scorecard to keep track of all the different model numbers.

The first successful double action/single action handgun was the Walther P.38 - and it came out in WW2, unfortunately, the Walther factory was captured by the Nazis and they produced many models of the P.38. During WW2, and those guns are still running big dollars, because they bear the Nazi insignia. (Both pre-war and post-war guns don't have Nazi Waffnamp markings.) About 35 years ago, when I was living in Colorado Springs, Colorado, there was a new gun shop in town, oddly enough. because. , they always had German Lugers and Walther P.38 pistols for sale - and they

They bore the marks of the Nazi Waffnamp. Someone more knowledgeable than I discovered that these two fellows were stamping their pre-war and post-war production guns with Nazi symbols, leading people to believe they were buying pistols manufactured during Nazi Germany. have been. In short, the BATF helped put these two counterfeiters out of business.

Back to the Walther P.38, as I mentioned, it was the first commercially produced pistol that fired both double-action and single-action modes. This meant you could chamber a round and de-cock the hammer - after that, the first shot was a long trigger pull double action mode. All subsequent shots were in single-action mode - with a very short, light trigger pull. And, if you're done shooting, you can use the de-cocker to safely lower the hammer and your next shot will return to long double-action trigger pull mode. Browning High Power lacked this. The P.38 D-Cocker carved out a new niche in the firearms world. Around 1949 or 1950 - records are conflicting - the U.S. The Army was in the market for a 9mm double-action/single-action handgun to replace the grand ol' Colt Government Model 1911. This is where Smith and Wesson entered the fray. , not that there was any real competition.

Accurized S&w Model 39 2 Semi Automatic Pistol

S&W came out with the Model 39, and it was a single-stack 8-round 9mm pistol, with an aluminum frame and weighing about 28-ounces. It was huge at the time, a full size 9mm handgun, which was light, and fired a 9mm round - wow! In 1954 the Army again expressed interest in the S&W Model 39. But by today's standards, it was only around the edges. After some time, the military decided to stick around.

S&w 39-2, holster for s&w model 60 2 inch, s&w model 39 2 review, s&w 39 holster, s&w model 13 2, s&w 39 2 holster, s&w model 39 holster, s & w model 39, s&w model 39 review, s&w 39, s&w 39 2 for sale, s&w mod 39 2